CareerStarter

The SkillHero Profile Complete Badge. Welcome to the club.

SH Profile Complete

The SkillHero Mentor Badge. There is no higher career calling than being a mentor!

SH Mentor

You have added your Credentials, Certifications, and Licenses to your profile.

Self Promoter

Thank you for adding your professional experience!

Experienced

You have invited 5 friends to join the app. Way to encourage others to join our craft community!

Community Builder

You now have 10 connections! Keep networking!

Influencer

Nanaimo, British Columbia, Canada

Carpentry Instructor

OFA Level 2

Carpentry Red Seal

Exterior deck framing is the process of creating the structural framework for an outdoor deck. It involves site preparation, design and planning, digging footings and pouring concrete, installing posts, attaching beams, laying joists, and finally, installing decking boards on top of the joists.

Exterior Deck

Rough framing, also known as rough carpentry or framing carpentry, is the process of constructing the basic structural framework of a building. It includes the installation of the framing members, such as the walls, roof, and floor systems, as well as the installation of the rough plumbing, electrical, and HVAC systems.

Rough

Rafter framing is a method of constructing the roof structure of a building using rafters. Rafters are the sloping beams that run from the eaves to the ridge of a roof and support the roof decking and covering. The process involves designing and cutting the rafters to the appropriate length and angle, and then attaching them to the ridge board and the top plates of the walls.

Rafters

The ability to construct and shape forms for poured concrete decks. This skill includes the ability to measure, mark, cut and assemble formwork, level and plumb the forms, brace and support the forms, use form-release agents, **** the forms and understand safety regulations related to formwork.

Decking

The skill of concrete forming for footings and foundations is the ability to construct and shape forms for poured concrete footings and foundations. This skill includes the ability to measure, mark, cut and assemble formwork, level and plumb the forms, brace and support the forms, use form-release agents, **** the forms and understand safety regulations related to formwork

Footings & Foundations

The ability to construct and shape forms for poured concrete columns, including understanding and using different types of concrete formwork systems, assembling formwork, leveling and plumb formwork, bracing and supporting formwork, using form-release agents, stripping formwork and understanding safety regulations related to formwork.

Columns

The ability to construct and shape forms for poured concrete stairs. This skill includes the ability to measure, mark, cut, and assemble formwork, level and plumb the forms, brace and support the forms, use form-release agents, **** the forms, understand and comply with safety regulations related to formwork, and creating and installing the forms for the treads and risers.

Stairs

Stair framing is the process of constructing the structural framework for a set of stairs. This includes the stringers, risers, treads, and any other supporting members that make up the stairway. The process involves designing and cutting the stair parts to the appropriate length and angle, and then attaching them together to create a stable and safe stairway.

Exterior trim carpentry refers to the process of installing and finishing decorative woodwork elements on the exterior of a building. This includes window and door casings, eaves, gable end trim, porch trim, and other architectural features that are used to enhance the aesthetic of a building's exterior.

Exterior

Window installation refers to the process of installing windows in a building or structure. This skill involves the measurement, cutting, fitting, and securing of windows in an opening, as well as ensuring that the window is properly sealed and weatherproofed.

Window Installation

The process of installing a barrier in a building or structure to prevent the infiltration of moisture. Moisture barriers are typically installed in areas where moisture is likely to accumulate, such as basements, crawl spaces, and attics, to prevent water damage and mold growth. The most common types of moisture barriers are made of plastic or other waterproof materials, and they are installed on the warm side of a building's insulation.

Moisture Barriers

Skill of identifying and sealing any gaps or holes in a building's envelope that allow for the uncontrolled flow of air. Includes the ability to use different types of sealants and materials such as weatherstripping, caulking, spray foam insulation and door sweeps, to seal any gaps or holes in the building's walls, floors, ceiling, windows, and doors, and to understand and comply with building codes and energy efficiency standards.

Air Sealing

Building codes and compliance refers to the knowledge and understanding of the regulations and standards that govern the design, construction, and operation of buildings. This includes local, state, and national building codes, as well as other regulations such as zoning laws and accessibility guidelines.

Building Codes & Compliance

Residential layout refers to the process of designing and planning the layout of a residential building, such as a single-family home or an apartment complex. This includes tasks such as determining the number and size of rooms, the location of windows and doors, and the placement of electrical and plumbing systems.

Residential Layouts

Commercial layouts is the process of determining the location and orientation of commercial buildings, such as office buildings, retail centers, and other types of non-residential structures. This involves creating detailed plans and drawings that show the location of the building, its dimensions, and the location of various features such as restrooms, stairwells, and elevators.

Commercial Layouts

Blueprint reading is the ability to interpret and understand the technical drawings, or blueprints, used in the construction industry. These drawings provide detailed information about the layout, design, and dimensions of a construction project, and are used by architects, engineers, and construction professionals to plan and execute the construction process.

Blueprint Reading

Transit leveling, also known as "transit and level" method, is a surveying technique used in construction layouts to establish precise horizontal and vertical control points. It involves the use of a transit-level instrument, which is a combination of a telescope and a spirit level, to measure and establish elevations, alignments, and horizontal control points.

Transit Leveling

Pneumatic tools are powered by compressed air, and the skill of using pneumatic tools involves understanding how the tools work and how to properly operate and maintain them. This includes knowledge of the different types of pneumatic tools available and their specific uses, as well as how to properly set up and connect the air supply to the tool.

Pneumatic Tools

Power-actuated tools, also known as powder-actuated tools, are specialized tools that use a controlled explosive charge to drive a fastener (such as a nail or stud) into a substrate (such as concrete or steel). The skill of using power-actuated tools involves understanding the principles of operation, safety protocols, the different types of fasteners and charges, and the proper techniques for using the tool.

Powder Actuated Tools

The ability to properly and safely operate various types of power tools, such as drills, saws, and sanders. This includes knowledge of the different types of tools and their functions, as well as how to maintain and troubleshoot them. It also includes the ability to use the tools to complete tasks efficiently and accurately.

Power Tools

The ability to properly and safely operate various types of hand-held tools, such as screwdrivers, pliers, hammers, and wrenches. This includes knowledge of the different types of tools and their functions, as well as how to maintain and troubleshoot them. It also includes the ability to use the tools to complete tasks efficiently and accurately.

Cameron Frenette

Training and Education

Experience

Skills

Others

Skills

Jumpstart a well-paying career with CareerStarter.